Hamptons has concluded the acquisition of CNC Center Ltd. at Veszprém, Hungary. This event put a full stop at the process that started in 2021 when Hamptons began a hire arrangement of two top of the range Okuma machining centres. Hamptons hired skilled staff locally and started to integrate this manufacturing capacity into the existing…
Blog
Miyano ABX64SYY Dual spindle turning centre at Hamptons Ltd.
Hamptons has accumulated a solid production base of machine tools over the past years. However, this latest addition to the machine park is undoubtedly the biggest one-off development. A top of the range Miyano, twin spindle, twin turrets and 2 Y axis CNC turning centre was installed in late 2021 at Hamptons to further enhance…
Installing the fifth Takisawa NEX110 at Hamptons
Hamptons has been using Takisawa NEX110 turning centres for many years. Its robust architecture and versatility suits very well to our product portfolio. Therefore, Hamptons decided to purchase a fifth piece to complement our existing machines both in capacity and with its automated tailstock. Longer, shaft type parts can be better machined, contributing to our…
How to overcome the challenge of milling hard metal
Milling hard metal is considered one of the major challenges in precision machining. The motto ‘Rough soft, finish hard’ may sound familiar to all in the industry. In this article, we’re providing an overview on what the underlying reasons are and what manufacturing best practices are used to overcome this challenge. Milling hard metal in…
HAAS 3+1-Axis Vertical Turning Centre purchase at Hamptons Ltd.
We are pleased to announce that we have bought HAAS VM-3 3+1-Axis Turning Centre. With this machine, our machining diameters and lengths will not change but our capacity will definitely grow. Specifications: Table area 914 x 356 mm A-Axis Ø 210 mm A-Axis movement 360° X-movement 1016 mm Y-movement 660 mm Z-movement 635 mm…
Doosan DNM 350/5AX 5 Axis Vertical Turning Centre purchase at Hamptons Ltd.
We are pleased to announce that we have bought Doosan DNM 350/5AX Vertical CNC Turning Centre. With this machine, our machining diameters and lengths will not chance but our capacity will definitely grow. Specifications: Table area: 350 mm diameter X-movement 600mm Y-movement 655mm Z -movement 500mm A-movement 150° C -movement 360° Max. weight of workpiece…
DOOSAN PUMA 2600LB CNC Turning Centre purchase at Hamptons
We are pleased to announce that we have bought DOOSAN PUMA 2600LB CNC Turning Centre. With this machine, we hope to be able to give you better service. Specifications: MFG. Date: 2016 Chuck capacity: 305 mm Number of stations in turret: 12 Max. turning diameter: 480 mm Max. turning length: 1245 mm Control system: Fanuc…
Y-axis CNC Turning Centre purchase at Hamptons
We are pleased to inform you that we have just bought Haas ST- 30Y Y-axis CNC Turning Centre. With this machine, we hope to be able to give you better service. The following is a brief extract from the manufacturer catalogue for your information: SWING DIAMETER S.A.E. Metric Over Front Apron 31.75 “ 806 mm Over…
New machine in our machinery
HAAS UMC 750 CNC VERTICAL MACHINING CENTER The UMC-750 is a 5-axis 40-taper vertical machining center with 30″ x 20″ x 20″ travels and an integrated dual-axis trunnion table. The machine is equipped with a powerful 8100-rpm inline direct-drive spindle driven by a 30-horsepower vector drive system, and comes standard with a 40+1 tool side-mount…
